So I have decided to spend a little bit of my tax returns on some better protection for the front end of the CJ.
I currently have a PSC Trail Stinger bolted onto the front end of the frame. IMO one good nose dive and the little tabs holding it on are toast. Also I currently have nothing to protect the radiator / grill / hood if I were to take a hard flop or roll.
Here is the current configuration...

The plan is to get rid of the PSC Stinger and incorporate a Grill/Hood Hoop with a different "stinger" design which will come up just past the nose of the hood but not stick out a mile in front of the Jeep. I will also tie the stinger and hoop together with some horizontal supports. Another requirement is that it will need to be removeable in order to service the winch, grill, etc... if need be.
Got the first piece of the puzzle today from Blue Torch Fabworks...
